Home Improvement

Thoughts & Stuff I Like When We Redid Our House

Drawer Handle

How to Buy and Fit a Kitchen Door Handle or Knob

Kitchen Door handles

Your kitchen design can be affected by Door handles and as it's considered an important part of your kitchen design. They will decorate your initial style of your kitchen. It is touched much time each day. More often it should an attractive, stylish and durable to maintain your kitchen design more gorgeous.

You will face up some of questions while thinking for new kitchen door handle, which are detailed below.

1. Are you going to replace an alternately kitchen door handle or a new installation?

2. What you are actually looking for, a kitchen door handle or kitchen door knob?

3. What style of handle you want to buy?

4. What size of handle would be suitable for your kitchen door?

5. Have you got the tools which are required while fitting a handle?

Fitting new kitchen door handles is slightly hard as they should have two holes. Distance between the hole called "hole centers" and one modern kitchens these will be:

64 mm 96 mm 128 mm 160 mm 192 mm etc in increments of 32 mm.

For replacing the handle simply unscrew the old bolt, and then fit the new handle using your Philips screwdriver. The process for fitting a unique handle not just takes more than two minutes.

Replacing the door and handles will give a completely new look to your kitchen. This approach also allows you what quality, style and size knob or handle you like.

Kitchen door knobs

Changing an existing kitchen knob is not hard. But a new one is little tricky because of making a new hole.

While changing the knob simply remove the existing knob. We recommend you to use a Philips screwdriver for unscrewing or bolting.

Fitting a door knob or handle in a new door is slightly complicated as there need to drill holes in your new door and drawer fronts.

The most important aspect you should keep in mind while fitting door knobs or handle is consistency, so you should buy a jig to make sure all the holes are drilled in the right place on every drawer front or kitchen drawer.

You will need Handle Jig, 4.0mm drill bit, Philips screwdriver and Cordless drill during this process.

You can find more useful articles such "how to fit your door lock" etc at http://designerhandle.co.uk.

About the Author

Darryl is an expert in the production and fitting of kitchen and cabinet door knobs, more information can be found at http://designerhandle.co.uk

Will Cillit Bang remove rust from tin drawer handles?

If not, can anyone recommend a solution in which I can soak the handles so that the rust is removed without the need to sand them down, and without damaging them?
Oh, I don't want to replace the handles as it's a really old chest of drawers and the handles are in a nice art nouveau style.
and the reason i though cillit bang is because of the 'cleaniing the penny' bit in the ads...

Tin does rust.

You may wish to soak the handles (if easily removable) in a solution of oxalic acid or spread Naval Jelly on it. It's recommended to use about a 12% oxalic acid solution. Oxalic acid shouldn't affect finished surfaces, only attack rust, but I would be very careful. Read any directions on these or other products carefully and always test it's performance in a small area. For small rust spots or pitting through the finish you might try an ordinary ruby stick eraser or one found on a pencil for better control. The eraser on an ink pen is more abrasive, but it may work on tougher areas. Try to apply the polish or wax as soon as possible, to reduce the amount of oxidation developing on the newly cleaned surface.

Or for home remedies...
Remove rust by rubbing the affected area with super fine steel wool (0000) or a raw potato that has been dipped in whiting. After removing rust, wash the tin piece in hot, soapy water, rinse well and dry thoroughly. Use a thin coat of paste wax containing carnuba to help prevent rust.

MEDICAL CARTS W SERIES