Feed Drill
 |
| No items matching your keywords were found. |
Feed Drill
Wood Drilling Machines
A drilling machine, called a drill press, is used to cut holes into or through metal, wood, or other materials. Drilling machines use a drilling tool that has cutting edges at its point. This cutting tool is held in the drill press by a chuck or Morse taper and is rotated and fed into the work at variable speeds. Drilling machines may be used to perform other operations. They can perform countersinking, boring, counter boring, spot facing, reaming, and tapping. Drill press operators must know how to set up the work, set speed and feed, and provide for coolant to get an acceptable finished product.
These types of the wood drilling machines comes with the different bits to choose for , that means u can do several things from a single machine and these are called as the drilling bits. Some of the bits with there uses are given below
Around-the-corner bit: to cut curved holes in tight corners with an angled cutting surface.
Auger Bits: designed to drill holes in wooden material. The drilling end has a screw head so that the bit cans self feed.
Brad-point drills: similar to standard bits but have a sharpened point that makes it easier to start in wood. Drills cleaner holes than a spade bit.
Counterbore: a drill bit which permits a screw to be driven beneath the woods surface. The hole can then be filled with a plug.
Countersink bit: has an angled tip that's designed to form a depression for screw heads.
Drill Saw bit: Used to cut holes in metal and wood. Can enlarge existing holes.
Expansion bit: another term for adjustable bit. An expansion bit uses an adjustable cutter to bore holes of varying sizes.
Fly Cutter: used on a drill press to cut circles. The diameter of the circles can be adjusted by changing the cutter setting.
Forstner Bit: used to a create a flat bottomed hole in wood; a mortise can be formed by cutting overlapping holes. Also used to a create a segment of a hole at the edge of a board. Use only in a drill press.
Glass bit: has a carbide tip for drilling through glass.
Whole saws: cuts holes from 1" to 6" in diameter, have a center bit for guiding the cutting edge of the saw.
Masonry bits: have carbide tips for drilling holes in masonry, use at speeds below 400rpm.
MultiSpur bit: drills holes large enough to run pipe or conduit through. A threaded screw in the center of the cutting circle pulls the work towards the cutting edge.
Nail Spinner: used to start finishing nails, prevents wood from splintering as it is driven in. A hammer is used to finish the job.
Reamer Bit: Tapered bits that can be used to fit into an existing hole either to enlarge it.
Rotary Files: used for the same purpose as a conventional file, great for expanding holes in metal and cleaning up rough edges.
Paint Mixers: consist of a shaft with fan type blades. Put the shaft into the paint before rotating to avoid splatter.
For more information on Wood Drilling Machines you can visit http://www.homag-india.com/
About the Author
This is Jon from <A href="http://www.indian-seo.com">Indian SEO</A>, you can check Homag India Website for <A href="http://www.homag-india.com/">Woodworking machines</A>.
Do you know the drill? Eating your pet will only feed your family for a few hours and then what's next?
Lol! Yea, that would be damn stupid!
Even if I were starving I would rather starve with my life-long dog or cat etc. companion and die with him/her than eat him/her and betray my life-long friend's trust.
And yea, if you eat your pet it will only last for a few hours, so what would come next if you were a stupid and starving family? Maybe you'd start eating each other and go cannibal (only if you were really hungry of course) but I don't think that will happen anytime soon and I certainly hope not!
=•D
Homemade power table feed for mill drill